TT351W coupe update!

been slowly working on this thing.. its made some big headway in the last few months

piller pod, with AEM wide band, and autometer boost/vac, also is a super bright LED shift light and a red LED indicator for the meth kit
http://www.fastcompany.ca/gallery/d/761-2/Copy+of+IMGP1055.JPG

here is the custom install, where the factory message center was now is my autometer Electric fuel pressure and trany temp, Also the BandM fox hammer, had to make the bezzle to fit the early console, i think it work out alright.
http://www.fastcompany.ca/gallery/d/764-2/Copy+of+IMGP1057.JPG

all the new part are wired to these snazzly distribution block for ease of everything
http://www.fastcompany.ca/gallery/d/767-2/Copy+of+IMGP1059.JPG

new bypass reg system
http://www.fastcompany.ca/gallery/d/770-2/Copy+of+IMGP1061.JPG

newly modded bonnet and dual feed ( had to pull half an inch out of the hight and replace it with 1/4 inch of sced 80)
http://www.fastcompany.ca/gallery/d/773-2/Copy+of+IMGP1064.JPG

overview
http://www.fastcompany.ca/gallery/d/779-2/Copy+of+IMGP1051.JPG

So we gonna see this badboy out this year??

So we gonna see this badboy out this year??
I sure hope so!
been way to long in the works!

I hope so as well .. as I only have two more years till retirement and the money tree will be defoliated after that.. lmao.. At least it will look clean and tidy when we are done..
no Nrigging. lol

I Hope so too, I was kinda thinking it was the project that never ends lol

u sould get some dash paint and paint it black maybe its just me
locks like its going to be fast

Thats the new 82 mustang rat rod look,,, lmao..

is there a big ic hiding somewhere or are the turbos going to draw from the headlight openings

is there a big ic hiding somewhere or are the turbos going to draw from the headlight openings
air filters will be behind the soon to be removed outer head light. cooling will be taken care of buy a big hit of methanol injected after the turbo

Should be fun if I can get mine going as well.

Should be fun if I can get mine going as well.
yea man!

new fuel pump!
Its a Walbro 255lph Hp pump, should meet all this cars needs
http://www.fastcompany.ca/gallery/d/780-1/Copy+of+IMGP1066.JPG

right on Rob, looks very killer bro!!!

You're going to need some sub-frame connectors......and a cage...... :2up:

You're going to need some sub-frame connectors......and a cage...... :2up:
I got some comp eng bolt in's in the car, and if we are lucky a cage will be needed! :2up:

going to install the fuel pump this week. and make the driverside cold side!

I am sure it will need them soon enough.

more pics
home made button handle
http://www.fastcompany.ca/gallery/d/790-2/Copy+of+IMGP1076.JPG

rear sump set up
http://www.fastcompany.ca/gallery/d/782-1/Copy+of+IMGP1068.JPG

and the pump hung wired and plumed
http://www.fastcompany.ca/gallery/d/787-2/Copy+of+IMGP1070.JPG

any more updates????????

got this unit running on the weekend, working through a few bugs now
updated pics!
new boots for the car
http://www.fastcompany.ca/gallery/d/845-2/c100_2804.JPG

ignition system nicely hidden under the seat
http://www.fastcompany.ca/gallery/d/851-2/IMGP0771.JPG

new vac/boost manifold
http://www.fastcompany.ca/gallery/d/854-2/IMGP0766.JPG

meth pump and tank
http://www.fastcompany.ca/gallery/d/857-2/IMGP0772.JPG

hot side and pipe, all heat wraped
http://www.fastcompany.ca/gallery/d/860-2/1.JPG
http://www.fastcompany.ca/gallery/d/863-2/2.JPG

installed
http://www.fastcompany.ca/gallery/d/866-2/3.JPG

pipe
http://www.fastcompany.ca/gallery/d/869-2/4.JPG

looking good

:2up:

I should have the AMC out in the next couple weeks. Let me know when you got all the bugs worked out and we can line em up. :D

I should have the AMC out in the next couple weeks. Let me know when you got all the bugs worked out and we can line em up. :D
got one of the major bugs worked out tonight.

next one is find out why the flex plate is making sounds

just a quick blurb, dynoed last night , had a bunch of issed with controling the boost.
ended up just letting it go buck wild with alot of timing pulled out,
car made 378 hp and 429 ft lbs

from what i can tell the turbos added about 188hp and 154 ft lbs

going to get a boost controler on the car and try to get rid of the stupid rich condition up top.

thanks for following the car over the years. :2up:

PS: gonna try to get it to the track friday night

looks good....now lets see some numbers!!

its done!
well almost
a few bugs to work out still
http://www.fastcompany.ca/gallery/d/905-1/IMGP1268.JPG

Dam, that's looking good :beer:

Dam, that's looking good :beer:
thanks Dave!
i miss you man, what you been up to?

thanks Dave!
i miss you man, what you been up to?

Not much auto related.... :( Still looking for a project car/old truck.

I've been building guitars......amplifiers, and just hanging out.

Are you racing this year?

Not much auto related.... :( Still looking for a project car/old truck.

I've been building guitars......amplifiers, and just hanging out.

Are you racing this year?
only made 3 passes so far this year, things have been slow in the car aspect.
I need to hire you to build me a small cabinet for my living room. :2up:

I need to hire you to build me a small cabinet for my living room. :2up:

Come on out, I'll help you build it. :2up: